You can Use liquid glass to accent, brighten, magnify, and add dimension to embellishments and designs. Here are the directions:
- Turn bottle upside down and let liquid flow to tip (do not shake).
- Remove cap and gently squeeze bottle to establish flow onto your project.
- Drying time will vary according to amount of product applied, ranging from 15 minutes to one hour.
- After use, rinse applicator tip with warm water and replace cap.
- If needed, clear tip with pin before using.
Here are two Easter cards I made about two years ago. I used liquid glass for the detail on the Easter eggs.
Now, it is your turn!
Happy Stamping!
Wow! Beautiful cards as usual. I must must start fitting scrapbooking into my schedule. If it wasn't for your blog and all the great things you creat I would not even feel tempted to get started again.
ReplyDeleteToo funny, Kim! My bottle looks remarkably similar to yours! Thanks for the tips. I actually used mine for the first time in a long time last night! :o)
ReplyDeleteAnother little tip that I do, I put a pin in the tip(I cut it down just a tad)and screw the lid back on, and I also store it upside down to keep the liquid near the top and air bubbles away.
Thanks for sharing! Looks like you are motivating many!!!
More pretty cards...
ReplyDeleteLove that glossy look.
Thanks for sharing.
I love liquid glass. I like how it stays raised when it dries adding dimension as well as shine. The brand I used before I joined CTMH didn't do that because it would dry flat. I just used liquid glass on my card I created yesterday. You can see it on my blog if you're interested. I love your technique posts because I learn so much! Thanks for posting them and your other great artwork. :)
ReplyDeletei purchased the liquid glass and never knew how to use it...thanks so much for the info...luv your blog
ReplyDelete